Commercial RO Plant Manufacturer in Delhi NCR
Commercial RO plants in Delhi NCR for hotels, hospitals, offices and schools.
What size commercial RO plant does my building need?
Jaljiwan commercial RO plants run from 50 to 15,000 LPH. We size each one from your peak kitchen or pantry demand, add storage so the tank does not run dry at breakfast or shift change, and match pre-treatment to borewell, tanker or municipal feed. Plants are built in Dwarka and installed across Delhi NCR.
Commercial RO plants sized for Delhi NCR hotels, hospitals and offices
Jaljiwan commercial RO plants sit between home purifiers and heavy industrial systems. Packages cover 50 to 15,000 LPH and are quoted from peak demand. Built in Dwarka, New Delhi for daily or high-duty use, they serve hotel kitchens, hospital utility lines, offices and school canteens across Delhi NCR where water quality and uptime both matter.
Most commercial RO plant enquiries from Delhi, Gurugram, Noida and Faridabad come from hotels, hospitals, offices and schools that have outgrown a domestic purifier. Peak kitchen or pantry demand is the starting point. We convert that into LPH, add storage so breakfast or shift change does not empty the tank, and match pre-treatment to borewell, tanker or municipal feed.
Space in a hotel basement or office plant room is usually tight. Skid-mounted commercial RO plants from Dwarka keep site work short: sand or carbon filters, the RO frame, and a small dosing set on one footprint. We check power, drain and access before fabrication so the skid actually fits the door and the pad.
After commissioning, daily checks stay simple: pressures, product TDS and cartridge condition. Jaljiwan can train kitchen or facility staff, or take the plant on AMC with spare parts from Dwarka. If you already run an office RO that cannot keep TDS or flow, we survey it and say whether a membrane change, a new pre-filter train or a larger commercial RO plant is the honest next step.
For higher process or boiler duty, see our industrial RO plants. After handover, AMC services and RO spare parts keep the plant running. Use our guide on how to choose RO plant capacity, or Contact Jaljiwan with your LPH need and water report.
Key Features
Skid-mounted packages
Factory-assembled skids reduce site work and speed commissioning.
SS & FRP options
Material of construction matched to feed water and hygiene requirements.
Auto flush & protection
Low-pressure cut-off, high-pressure trips, and membrane flush logic.
Pre-treatment trains
Sand, carbon, softener, and antiscalant dosing as required by water analysis.
Instrument panel
Flow, pressure, and conductivity monitoring for operators.
Scalable capacity
From a few hundred LPH to multi-KL modular blocks.
Benefits
- Stable product-water quality for F&B, healthcare, and guest services.
- Lower operating cost versus bulk packaged water procurement.
- Designed for operator-friendly routine checks and AMC contracts.
- Integration with storage, UV, and distribution loops.
Applications
How Jaljiwan delivers Commercial RO Plants in Delhi NCR
Commercial RO Plants specifications
Final figures are confirmed after water analysis and a site survey in Delhi NCR.
| Capacity range | 50 to 15,000 LPH, quoted to demand |
|---|---|
| Product TDS | As per design (typically <50 to 100 ppm) |
| Operating pressure | Membrane dependent (typically 10 to 15 bar for brackish) |
| Frame | MS powder-coated / SS304 |
| Control | Semi-auto / fully automatic PLC options |
| Pre-treatment | Custom to feed water analysis |
Industries that use Commercial RO Plants
What decides the price of a commercial RO plant
There is no single price for a commercial RO plant, because two plants of the same LPH can be built very differently. The quote moves with these points:
- Capacity in LPH, worked out from peak demand, and the storage that goes with it
- Raw water quality: TDS, hardness, iron and turbidity in the borewell, tanker or municipal supply
- Pre-treatment before the membranes, such as sand and carbon filters, a softener or antiscalant dosing
- Frame and piping material, MS powder-coated or SS304
- Semi-automatic or fully automatic PLC control
- Site work: plant room access, power, drain and pipe runs
RO plants for hotels, hospitals, schools and offices
Hotels mostly need RO water for kitchens, drinking points and coffee machines. Hospitals use it for drinking water and utility lines, while schools and offices use it for canteens and water coolers. As an RO plant manufacturer in Delhi, we build these plants in Dwarka and install them across Delhi NCR. Send your daily use and a water report, or call +91-9312889634, and we will price the plant you actually need.
Commercial RO Plants photos from Jaljiwan projects
Commercial RO Plants: common questions
Yes. Jaljiwan builds commercial RO plants in Dwarka, New Delhi for hotels, hospitals, offices and schools. We install and support them across Delhi, Gurugram, Noida and Faridabad.
Commercial RO plants we quote cover 50 to 15,000 LPH and are sized from peak demand and your water report, not from a round catalogue number.
Yes, if storage, booster pumps and distribution are sized for simultaneous peak loads. Hotel and campus jobs in NCR often use one plant with a central tank.
Yes. We survey kitchen or pantry demand, borewell or tanker quality, and space, then install a commercial RO plant with AMC if you want it.
It depends on capacity and feed TDS. We give an estimated kWh per cubic metre in the proposal so you can plan the electrical load.
If you share city, LPH need and a water test, a standard commercial RO package can often be quoted within a working day from our Dwarka office.
Yes. Jaljiwan AMC covers filter changes, membrane checks and service visits for commercial RO plants in Delhi NCR. Spare parts are stocked in Dwarka.
Often yes. We check the frame, tanks and membranes. In some cases we reuse tanks or the skid and only change the RO train.
Capacity in LPH, raw water TDS and hardness, pre-treatment, frame material, automation and site work. We quote from your water report and daily use.
Yes, these are the main users of our commercial RO plants. Each plant is sized from the building's peak hour, from 50 to 15,000 LPH.
What to send with your Commercial RO Plants enquiry
Every Jaljiwan proposal is built from a water report and a site note, not a catalogue number. Send these with your enquiry and the first proposal will be closer to final.
- Raw water test report (TDS, hardness, iron, turbidity) or the source: borewell, tanker or municipal
- Daily water demand or peak flow you need, in litres per hour or KLD
- Plant room or space available, with photos if possible
- Power supply available on site (single or three phase)
- Site location and any existing plant you want reused or replaced